Welcome to our online store!

Newsletter Sign Up
VegiBee Garden Pollinators
Easy to operate.
No remotes, no assembly, no downloads.
We promised it would be easy!

VegiBee Garden Pollinator VGP-01 Operating Instructions

Rechargeable Model


Unit Operation

Press the on switch to begin the wand vibration. Use the up and down buttons to change the speeds on the VegiBee™ garden pollinator. Press the off button to stop the vibrating wand. Return the VegiBee garden pollinator to the charging base when not in use.



Changing the vibrating wand

Turn unit off. Rotate the wand ¼ turn to the right and lift from the unit. Install the new wand. Align the groove on the wand with the ridge on the pollinator. Gently rotate the wand ¼ turn to the left until it clicks in place on the pollinator. Do not attempt to attach the pollen spoon to the pollinator.



Recharging Instructions

Turn the unit off. Place the pollinator charging base on a flat surface. Place the VegiBee garden pollinator in the charging base. Connect the USB connector into a computer, or use the AC adapter. Prior to initial use, charge the unit for 12 hrs. with the AC adapter and 16 hours with a computer.


Cleaning the unit

Use a clean, damp cloth to clean the unit, then dry the unit before charging.
Do not use chemicals or alcohol on the unit. Do not immerse the unit in water.


Shut-off time

The unit will shut off after 2 minutes.


Storage

Keep the pollinator indoors when not in use. Heat and cold, as well as humid conditions, will shorten the battery life. Do not use the pollinator for any other use, except pollinating plants. When not in use, leave the pollinator on the charging base. Keep the pollinator out of the reach of children at all times.



VegiBee Garden Pollinator-Express VGP-02 Operating Instructions

Battery Powered Model


Unit Operation

Press the ON/OFF power button to turn the wand on.
Press the ON/OFF button to turn the vibrating wanf off.
Return the VegiBee garden pollinator to the charging base when not in use.

Remove the vibrating wand

Turn unit off. Rotate the wand ¼ turn to the right and lift off the pollinator.

Install the Vibrating Wand

Align the groove on the wand with the ridge on the pollinator. Gently rotate the wand a 1/4 turn to the left until it clicks into place. Do not use the spoon on the pollinator.


Changing the Battery

Remove the vibrating wand from the pollinator. Unscrew (counter clockwise) the battery cover from the lower half of the pollinator. Remove the battery from the pollinator. Install a fresh AA alkaline battery. Position the negative side of the battery towards the top of the pollinator. Re-install the battery cover, screwing the cover on (clockwise). Do not over tighten.


Cleaning the unit

Use a clean, damp cloth to clean the unit, then dry the unit before charging. Do not use chemicals or alcohol on the unit. Do not immerse the unit in water.


Storage

Keep the pollinator indoors when not in use. Heat and cold, as well as humid conditions, will shorten the battery life. Do not use the pollinator for any other use, except pollinating plants. When not in use, leave the pollinator on the charging base. Keep the pollinator out of the reach of children at all times.